Zhucheng new Ruihua machinery Co., LTD

Introduction of servo CAM rotary table positioner

(Reproduction is prohibited without the author's consent)

Servo CAM rotary table positioner rotates different angles through the servo CAM rotary table to drive the workpiece to reverse and change, to achieve the ideal machining position and welding position. (The workpiece can be clamped on the tooling mold together to flip and change), can achieve integrated linkage with the robot, three-dimensional surface welding, can also be independent automatic flip (change), manual welding or processing operations, etc., due to the servo CAM turntable repeated positioning accuracy is high, long service life, has been widely used in various forms of displacement mechanism. Instead of the original gear return support mechanism, the positioner mainly has the following three kinds:

1. Servo CAM turntable three-axis two-station positioner (I-type positioner or welding workstation)

The servo CAM turntable at the bottom drives the I-shaped body to turn 180° to realize robot welding while loading and unloading parts, so as to improve the working efficiency of the positioner. A servo CAM turntable is installed on each side of the I-shaped body to drive the workpiece to turn over, so as to realize different welding positions of welding parts, and adjust the turning Angle arbitrarily within 360° to meet the welding requirements of the workpiece. Suitable for some frame shape sheet metal welding.

2. Servo-cam rotary table L-type position changer (L-type two-axis simplex position changer on the left, L-type three-axis simplex position changer on the right)

The L-type positioner is suitable for the welding of square or irregular shaped bucket parts (such as excavating buckets of excavators).

The vertical servo CAM turntable drives the L-shaped mechanism arm to turn over (360° arbitrary Angle), and the workpiece is installed on the servo CAM turntable at the end of the L-shaped to rotate (360° arbitrary rotation). The arc welding of the curved surface can be realized through the two-axis rotating linkage with the robot. On the basis of the two-axis rotating axis, a linear lifting axis is added to become a three-axis linkage to maximize the welding of the space surface. L-type positioner has two simplex positions and three simplex positions.

3. Servo CAM turntable single-axis simplex position changer (with end support)

It is suitable for the welding of long workpiece, and can use the tooling bracket for the flip welding of long and special-shaped workpiece. The structure is simple and the cost is low, and the working principle is similar to that of the I-positioner.

Whether in terms of welding accuracy, service life or manufacturing period, the servo CAM turntable is

At present, the best choice of positioner, hub and other station change mechanism. Our company has standardized and serialized the servo CAM turntable to facilitate the selection of integrated manufacturers. According to user requirements, our company can give the overall design scheme of the positioner, welding workstation, hub and the production and production of the main part of the frame, and can supply the whole set of the main body, saving the design of the integrated manufacturer and the trouble of multiple procurement, and the overall quality is more reliable.

Zhucheng new Ruihua machinery Co., LTD

E-mail:ruihuajixie@126.com

Tel: 0536-6051908 6098216

The website is www.ruihuajixie.com

Fax: 0536-6052908

Address: Shungeng Road intersection, Heping North Street, Zhucheng Economic and Technological Development Zone, Shandong Province