The rotation CAM installed on the entry shaft is connected with the output turret to make linear contact with the CAM roller radially embedded on the circumferential surface of the output turret and the CAM taper support rib on their corresponding bevel. When the entry axis rotates, the CAM divider roller rotates the output turret according to the given displacement curve while rolling along the inclined plane of the rib. In the region where the rib is balanced with the end face of the CAM, that is, in the static range, the roller engages its axis, but the output turret itself does not rotate.

    The taper support ribs are usually in contact with two or three CAM rollers so that the rotation of the entry shaft is transmitted evenly to the output shaft. If there is a non-slip situation between the CAM surface of the taper support rib and the CAM roller, it will damage the splitter. The uneven rotation can be eliminated by adjusting the distance between the axes. The stiffness of the splitter can be strengthened by adjusting the preload to access the CAM roller and the CAM elastic region. Its structure and function are the performance of the combination of CAM and CAM roller, which can be operated at high speed. Xiaobian once again reminds you that when the CAM splitter rotates, you must pay attention to safety, and when necessary, you must turn off the power to protect your own safety.