What is the origin of the splitter, the so-called origin of the splitter refers to the reference position of the splitter, for the force shaft, the keyway of the force shaft is opposite the direction of the output shaft, through the center of the point of the force shaft and the center of the keyway is perpendicular to the output shaft, which is what we call the origin of the force shaft, and this position is just the central point position of the output shaft stop Angle.

The position of the origin of the CAM splitter on the entry CAM is shown in the figure, which is the entry shaft of the splitter after completing the action of the splitter, entering the static Angle (that is, the center point of the CAM rib position in a straight line state) The origin of the splitter is a more important indicator in the use of the CAM splitter. On the one hand, the origin of the splitter is adjusted. Ensure that the driving Angle of the splitter in use matches the driving Angle of the induction system, in order to achieve the fine control of the intermittent function of the splitter such as PLC.

On the other hand, the origin adjustment of the splitter is also related to the splitter and the driven system (disk, etc.), and the Angle of intermittent transmission and actual processing need to stop is the same.