When the separator needs to be used, it is also necessary to pay attention to the lubrication work. As a CAM separator manufacturer, we should know how to do the lubrication work of the separator. Xiaobian and everyone to understand!

1, before use: should loosen the fuel hole bolt, it is deflated.

2. Oil filling: The separator has been filled with lubricating oil when leaving the factory.

3, oil change: oil change must be changed to clean heavy load gear oil. The first oil change needs to be changed after one thousand hours of operation, the second oil change needs to be three thousand hours after the last oil change, and the separator needs to change the oil once a year even if the operation time is relatively short.

4. The lubricating oil used in the separator is heavy gear oil for vehicles.