The robot's seventh axis can work in harsh environments.

The application of robot seventh axis has indeed brought many benefits to the production work of enterprises, not only improving the work efficiency, but also making the work better. Moreover, as far as the seventh axis of the robot itself is concerned, its technology is constantly improving, its performance is constantly optimized, and its ability will become more and more powerful.

However, because the motion range of each axis in the seventh axis of the robot has expanded a lot, the manipulator not only improves the coverage range, but also expands the motion range, making the operation space of the equipment wider.

At present, most robot seventh axes are equipped with advanced waterproof sockets, and each joint has a double-layer sealing structure, making the wrist protection level reach a very high level. Therefore, the seventh axis of the robot can maintain a stable working state even in harsh environments.

After the improvement of the seventh axis of the robot, its arm is lighter, and of course, there is a small motor with high speed, which greatly improves the working speed and acceleration of the robot. In addition, by integrating load weights, acceleration performance is improved and cycle times are effectively reduced.

In addition, the wrist of the robot's seventh axis is getting smaller, allowing the device to operate in a smaller space. By using high output torque, the load capacity of the wrist is increased and the shape selection of the workpiece is expanded.

In order to ensure full confidence, safety precautions should be taken not only in the workplace of the seventh axis of the robot, but also in the maintenance and inspection of the robot to ensure the safety of equipment and personnel and reduce unnecessary injuries or losses.

Robot seventh axis to take safety precautions in the workplace? First, it is important to ensure the cleanliness of its operating area and equipment. If there is oil, water, tools, workpieces, etc. On the ground, it may cause safety hazards to operators, resulting in serious accidents.

After using the tool, it needs to be returned to its original position outside the range of motion of the robot's seventh axis to prevent the robot from bumping into the tool left on the fixture, thereby forming the fixture or damaging the robot. After all other operations are done, don't forget to clean the robot and jig.

What measures should be taken during the protection and inspection of the robot? Very simply, as the operator of the seventh axis of the robot, it is necessary to wear special overalls, safety shoes and safety hats before operation in order to fully protect it.

It is necessary for the personnel responsible for the integration of robot systems, the designers and manufacturers of system safety equipment to understand and master the safety guardrail and safety equipment, and it is necessary to read the manual to understand the correct operation in emergency situations and the methods to be taken.

Strictly follow safety rules to prevent accidents or injuries. It is necessary for the personnel responsible for the protection and inspection of the seventh axis of the robot to check and confirm all circuits related to the emergency stop and make them safe and correctly interlocked in accordance with the corresponding safety rules. Ensure that the emergency stop switch can be pressed at any time during protection or inspection operations, so that the robot seventh shaft can be stopped immediately if needed.