Usually, we need to check the following size and position before installing a CAM divider: 1, the first check whether the type of high-speed precision CAM divider is correct, such as: check the number of stations, drive Angle, installation mode and installation direction, shaft spacing, rotation direction, etc. 2, then check whether the installation size of the CAM splitter is consistent with the bottom plate of the automation equipment, which is very critical, which is related to whether the CAM splitter can be installed smoothly. 3, check the oil hole and the oil hole is also a very important part, check whether their location is in a convenient place to use, after all, the CAM separator needs to be replaced after a period of time, just like the car engine needs regular maintenance. 4, check whether the flange surface and bottom surface of the high-speed precision CAM divider are processed according to the requirements of the drawing, because the accuracy requirements of some automation equipment are very high, it needs to have a positioning pin hole to assist the positioning accuracy, in order to prevent vibration and displacement during work. 5, manually check whether the CAM divider is running normally, we can take the smooth operation as qualified, check whether the operation is stuck and abnormal sound, and check whether there are loose screws.